Intel MFS5520VI User Guide - Page 27

2 Hardware Installations and Upgrades Before You Begin Before working with your server product, review the safety and ESD information at the beginning of this manual and in the appendices. Tools and Supplies Needed • Phillips* (cross head) screwdriver (#1 bit and #2 bit) • 1/4-inch nut driver • Anti-static wrist strap and conductive foam pad (recommended) Installation Guidelines Before installing options: 1. Observe the safety and ESD information at the beginning of this manual and in the appendices. 2. Remove the compute module from the chassis. Before doing so, you must first shut down the operating system and turn off the compute module. 3. Take note of the following color coding on components: - Blue on a component indicates a touch point, where you can grip the component to install or remove it from the server. - Green on a component indicates that the component may be hot-swapped. For a complete list of installation or removal steps, see the instructions included with the hot-swap component. Removing and Installing an Intel® Compute Module MFS5520VI Removing a Compute Module from the Chassis To remove a compute module from the chassis, follow these steps: 1. Observe the safety and ESD information at the beginning of this manual and in the appendices. 2. If the compute module is operating, shut down the operating system and power it down. 3. Release the two retention levers by pressing on the release button located between the two lever handles. Intel® Compute Module MFS5520VI User Guide 13