Intel X5472 Mechanical Design Guidelines - Page 13
Thermal/Mechanical Reference Design, 2.1 Mechanical Requirements - x5482 processor
UPC - 735858201551
View all Intel X5472 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Thermal/Mechanical Reference Design 2 Thermal/Mechanical Reference Design 2.1 2.1.1 This chapter describes the thermal/mechanical reference design for Quad-Core Intel® Xeon® Processor 5400 Series. Both Quad-Core Intel® Xeon® Processor X5400 Series and Quad-Core Intel® Xeon® Processor E5400 Series are targeted for the full range of form factors (2U, 2U+ and 1U). The Quad-Core Intel® Xeon® Processor X5482 sku is an ultra performance version of the Quad-Core Intel® Xeon® Processor 5400 Series with 150W TDP and is use only in workstation platforms. Mechanical Requirements The mechanical performance of the processor cooling solution must satisfy the requirements described in this section. Processor Mechanical Parameters Table 2-1. Processor Mechanical Parameters Table Parameter Volumetric Requirements and Keepouts Static Compressive Load Static Board Deflection Dynamic Compressive Load Transient Bend Shear Load Minimum Tensile Load Torsion Load Maximum Unit 70 311 25 111 35 3.95 lbf N lbf N in*lbf N*m Notes 1 3 3 3 3 2,4,5 2,4,6 2,4,7 Notes: 1. Refer to drawings in Appendix B. 2. In the case of a discrepancy, the most recent Quad-Core Intel® Xeon® Processor 5400 Series Datasheet and LGA771 Socket Mechanical Design Guide supersede targets listed in Table 2-1 above. 3. These socket limits are defined in the LGA771 Socket Mechanical Design Guide. 4. These package handling limits are defined in the Quad-Core Intel® Xeon® Processor 5400 Series Datasheet. 5. Shear load that can be applied to the package IHS. 6. Tensile load that can be applied to the package IHS. 7. Torque that can be applied to the package IHS. Quad-Core Intel® Xeon® Processor 5400 Series TMDG 13