JVC GZ-E100 User Guide - Page 33
Remaining Recording Time/Battery Power
View all JVC GZ-E100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
0 Digital zoom and image stabilizer are not available after "AUTO REC" is set. 0 "AUTO REC" cannot be used together with "TIME-LAPSE RECORDING" . When both are set, priority is given to "TIME-LAPSE RECORDING". 0 The auto power off and power-saving modes are not available after "AUTO REC" is set. Memo : 0 Recording stops when there are no changes for 5 seconds during recording. 0 Settings of "AUTO REC" are not saved when the power is turned off. 0 Recording may not start when the movements of the subject within the red frame are too fast or the changes in brightness are too small. 0 Recording may start due to changes in brightness even if there is no movement within the red frame. 0 While zooming, recording cannot be started. Recording Remaining Recording Time/Battery Power You can check the remaining recording time on the SD card as well as the remaining battery power. Memo : To select/move cursor towards up/left or down/right, press the button UP/< or DOWN/>. 1 Press OK/INFO. 2 Display the remaining recording time. . . .. 0 To display the remaining battery power, press OK/INFO again. 0 To exit the display, press MENU. 3 Display the remaining battery power. 0 To exit the display, press OK/INFO. 0 Press MENU to return to the remaining recording time display. 0 Remaining battery power will not be displayed when the AC adapter is connected. Memo : 0 You can change the video quality from the remaining recording time display. Select the video quality with the UP/< and DOWN/> buttons and press OK. 33