JVC KW-R930BTS Instruction Manual America - Page 21
Improve the voice quality, Make the settings for receiving a call
View all JVC KW-R930BTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
BLUETOOTH® To On the faceplate While talking on the first incoming call... Answer another incoming Press call and hold the current knob. call or the volume Reject another incoming Press and hold or call the volume knob. While having two active calls... End current call and activate held call Press and hold or the volume knob. Swap between the Press . current call and held call Adjust the phone volume*1 Turn the volume knob [00] to [35] (Default: [15]) during a call. Switch between hands-free Press and private talk modes*3 during a call. On the remote control ( Not available ) ( Not available ) Press and hold . ( Not available ) Press *2 or during a call. ( Not available ) *1 This adjustment will not affect the volume of the other sources. *2 Press and hold to continuously increase the volume to 15. *3 Operations may vary according to the connected Bluetooth device. Improve the voice quality While talking on the phone.... 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit. To return to the previous setting item, press . MIC GAIN NR LEVEL ECHO CANCEL Default: XX LEVEL -10 to LEVEL +10 (LEVEL -04): The sensitivity of the microphone increases as the number increased. LEVEL -05 to LEVEL +05 (LEVEL 00): Adjust the noise reduction level until the least noise is being heard during a phone conversation. LEVEL -05 to LEVEL +05 (LEVEL 00): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation. Make the settings for receiving a call 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. To return to the previous setting item, press . Default: XX SETTINGS AUTO ANSWER 01 SEC to 30 SEC: The unit answers incoming call automatically in the selected time (in seconds). ; OFF: Cancels. RING COLOR BATT/SIGNAL* COLOR 01 to COLOR 49 (COLOR 08): Selects the light color for the buttons as notification when there is an incoming call and during a call. ; OFF: Cancels. AUTO: Shows the strength of the battery and signal when the unit detects a Bluetooth device and the Bluetooth device is connected. ; OFF: Cancels. * Functionality depends on the type of the phone used. ENGLISH 17