JVC KW-R930BTS Instruction Manual America - Page 42
Part list for installation, Basic procedure, Installing the unit in-dash mounting
View all JVC KW-R930BTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
INSTALLATION/CONNECTION Part list for installation (A) Wiring harness (B) Flat head screw M5 × 8 mm (M5 × 3/8") (C) Round head screw M5 × 8 mm (M5 × 3/8") Installing the unit (in-dash mounting) Install onto the car brackets using the supplied screws (B) or (C). The screw holes differ depending on the model of the cars. Do the required wiring. ( 39) Car bracket Dashboard of your car Basic procedure 1 Remove the key from the ignition switch, then disconnect the terminal of the car battery. 2 Connect the wires properly. See Wiring connection. ( 39) 3 Install the unit to your car. See Installing the unit (in-dash mounting). 4 Connect the terminal of the car battery. 5 Press to turn on the power. 6 Reset the unit. ( 3) Use only the specified screws. Using wrong screws might damage the unit. 38 ENGLISH