JVC M505 Instructions - Page 16

Connections Before connecting the speaker cords; Twist and pull the insulation coat off and remove. This page is for Speaker cord (supplied) • Connect the silver cords to the black (r) terminals. • Connect the copper cords to the (q) terminals referring to the table below: FRONT SPEAKERS (LEFT) FRONT SPEAKERS (RIGHT) CENTER SPEAKER SURROUND SPEAKERS (LEFT) SURROUND SPEAKERS (RIGHT) White Red Green Blue Gray Powered subwoofer ( ) TH-M303: SP-PWM303 TH-M301: SP-PWM301 4 m (13 feet) 4 m (13 feet) Front speakers SP-THM303F Center speaker SP-THM303C 10 m (33 feet) Surround speakers SP-THM303S CAUTION • When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated near the speaker terminals on the rear of the powered subwoofer. • DO NOT connect more than one speaker to one speaker terminal. • When installing the satellite speakers on the wall; • Be sure to have them installed on the wall by a qualified personnel. DO NOT install the satellite speakers on the wall by yourself to avoid unexpected damage from their falling off the wall due to incorrect installation or weakness in wall structure. • Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage to equipment may result if the speakers installed interfere with daily activities. 13