JVC M505 Instructions - Page 30

Advanced operations 7 All Channel Stereo (DSP) All Channel Stereo (ALL CH ST.) mode can reproduce a larger stereo sound field using all the connected (and activated) speakers. All Channel Stereo can be used while reproducing 2 channel stereo source. Normal stereo sound All Channel Stereo 7 Indicators on the display window Digital signal format indicators PPCM: Lights when DVD AUDIO packed PCM signals comes in. LPCM: Lights when Linear PCM signal comes in. GD: Lights when Dolby Digital signals come in. C: Lights when DTS Digital (Surround) signals come in. No indication: No digital signal indicator lights when analog signals come in. Dolby Surround/DSP mode indicators GPLII: Lights when Dolby Pro Logic II mode is activated. DSP: Lights when All Channel Stereo mode is activated. Source signal indicators, etc. Light to indicate the incoming signals. a: Lights when the left channel signal comes in. b: Lights when the center channel signal comes in. c: Lights when the right channel signal comes in. d: Lights when the LFE channel signal comes in. g: Lights when the surround left channel signal comes in. i: Lights when the surround right channel signal comes in. h: Lights when the monaural surround channel signal or 2 channel Dolby Surround signal comes in. SW : Always lights. The channel with " " shows that the corresponding speakers are reproducing the channels' sound. If the channels' sound decoded into 5.1 channel is reproduced, only " " lights. Selecting the surround mode The system is set up to automatically select the optimal surround mode for input signal from digital multichannel software. When playing back 2 channel source, you can select the desired surround mode manually. IMPORTANT Before using the remote control for the following operation; • Set the remote control mode selector to AUDIO. See page 26 for button locations. 7 When playing back digital multichannel software (except during SURR OFF mode) The appropriate multichannel surround mode (Dolby Digital, DTS Digital Surround or Linear/Packed PCM) is automatically selected. 7 When playing back 2 channel source You can select either mode of Dolby Pro Logic II (PL II MOVIE/ PL II MUSIC) or the DSP (ALL CH ST.) mode. Press SURROUND repeatedly to select the desired mode. The surround mode is turned on and the current surround mode appears on the display window. Each time you press the button, the surround mode changes. For details on each mode, see page 26. To turn off the surround mode Press SURROUND repeatedly until SURR OFF appears on the display window. Storing adjustments - auto memory When you turn the power off, the system memorizes the current surround mode. The memorized mode is automatically recalled when you turn the power on. NOTE • When FM or AM is selected as the source, you cannot select any surround mode. • Note that the surround mode takes no effect on MPEG4 playback. • For a down-mixing prohibited DVD AUDIO disc, the system continues to output multi-channel signals with "MULTI CH" shown on the display window even if the surround mode is turned off during playback. On the other hand, the system outputs only the front left and front right channel signals with "LR ONLY" shown on the display window when you start playback with the surround mode having been set to "SURR OFF". Using the on-screen bar You can check disc information and you can use some functions using the on-screen bar. Showing the on-screen bar 7 Whenever a disc is loaded Press ON SCREEN. Each time you press the button, the on-screen bar changes as follows on the TV screen. Example: During DVD VIDEO playback OFF (The on-screen bar disappears) (back to the beginning) • The currently selected item shows green. 27