JVC M505 Instructions - Page 29

Advanced operations, Using the surround mode

Page 29 highlights

Advanced operations • The icon such as shows the types of discs the operation is available for. IMPORTANT Before using the remote control for the following operation; 1 Set the remote control mode selector to AUDIO. 2 Press DVD. • There are exceptions in the operation mentioned above. In such a case, follow each instruction. The buttons described below are used on pages 26 to 37. (play button) Remote control mode selector Cursor (3/2/Y/5)/ ENTER Number buttons Using the surround mode 7 Auto Surround (AUTO SURR) Used to reproduce the sound as it is recorded without any conversion (downmixing or simulation, etc.). For example, a multichannel source is automatically reproduced in multichannel audio. 7 Dolby Surround Dolby Pro Logic II*1 Dolby Pro Logic II has a newly developed multichannel playback format to decode all 2 channel sources - stereo source and Dolby Surround encoded source - into a 5.1 channel. Dolby Pro Logic II has two modes - Movie mode and Music mode: • Pro Logic II Movie (PL II MOVIE) Suitable for reproduction of Dolby Surround encoded sources bearing the mark . • Pro Logic II Music (PL II MUSIC) Suitable for reproduction of any 2 channel stereo music sources. Dolby Digital*1 Used to reproduce multichannel soundtracks of the software encoded with Dolby Digital ( ). 7 DTS Digital Surround*2 Used to reproduce multichannel soundtracks of the software encoded with DTS Digital Surround ( ). DTS Digital Surround (DTS) is another discrete multichannel digital audio format available on CD and DVD software. Available Surround modes for each input signal The B marks show available surround modes. Mode Surround off Auto Surround Dolby Surround DTS Digital Surround Signal SURR OFF AUTO SURR PL II PL II Dolby MOVIE*3 MUSIC*3 Digital DTS Dolby Digital (Multichannel) B Dolby Digital (2 channel) B DTS Digital Surround B (Multichannel) DTS Digital Surround B (2 channel) Analog (VCR) or Linear/Packed PCM B (2 channel) Linear/Packed PCM B (Multichannel) B - - B - B B B - - B - - - B B B B - - B B B - - B - - - - Linear PCM LPCM - - - - - B Packed PCM PPCM - - - - - DSP ALL CH ST.*3 - B - B B *1 Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", "MLP Lossless", and the double-D symbol are trademarks of Dolby Laboratories. *2 "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. *3 You can select these modes by pressing SURROUND. (A pg. 27) B - Continued on next page 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

26
Advanced operations
The icon such as
shows the types of discs the operation is
available for.
IMPORTANT
Before using the remote control for the following
operation;
1
Set the remote control mode selector to
AUDIO
.
2
Press
DVD
.
There are exceptions in the operation mentioned above. In such a
case, follow each instruction.
7
Auto Surround (AUTO SURR)
Used to reproduce the sound as it is recorded without any
conversion (downmixing or simulation, etc.). For example, a
multichannel source is automatically reproduced in multichannel
audio.
7
Dolby Surround
Dolby Pro Logic II
*
1
Dolby Pro Logic II has a newly developed multichannel playback
format to decode all 2 channel sources — stereo source and Dolby
Surround encoded source — into a 5.1 channel.
Dolby Pro Logic II has two modes — Movie mode and Music
mode:
Pro Logic II Movie (PL II MOVIE)
Suitable for reproduction of Dolby Surround encoded sources
bearing the mark
.
Pro Logic II Music (PL II MUSIC)
Suitable for reproduction of any 2 channel stereo music sources.
Dolby Digital
*
1
Used to reproduce multichannel soundtracks of the software
encoded with Dolby Digital (
).
7
DTS Digital Surround
*
2
Used to reproduce multichannel soundtracks of the software
encoded with DTS Digital Surround (
).
DTS Digital Surround (DTS) is another discrete multichannel
digital audio format available on CD and DVD software.
The buttons described below are used on pages 26 to 37.
Cursor
(
3
/
2
/
Y
/
5
)/
ENTER
Number buttons
(play button)
Remote control
mode selector
Using the surround mode
Available Surround modes for each input signal
The
B
marks show available surround modes.
Mode
Surround
off
Auto
Surround
Dolby Surround
DTS Digital
Surround
Linear
PCM
Packed
PCM
DSP
Signal
SURR OFF
AUTO
SURR
PL II
MOVIE
*
3
PL II
MUSIC
*
3
Dolby
Digital
DTS
LPCM
PPCM
ALL
CH
ST.
*
3
Dolby Digital
(Multichannel)
B
B
B
Dolby Digital
(2 channel)
B
B
B
B
B
DTS Digital
Surround
(Multichannel)
B
B
B
DTS Digital
Surround
(2 channel)
B
B
B
B
B
Analog (VCR) or
Linear/Packed
PCM
(2 channel)
B
B
B
B
B
Linear/Packed
PCM
(Multichannel)
B
B
B
B
*1
Manufactured under
license from Dolby
Laboratories. “Dolby”,
“Pro Logic”, “MLP
Lossless”, and the
double-D symbol are
trademarks of Dolby
Laboratories.
*2
“DTS” and “DTS
Digital Surround” are
registered trademarks
of Digital Theater
Systems, Inc.
*3
You can select these
modes by pressing
SURROUND
.
(
A
pg. 27)
Continued on next page