Kenwood BC550DU User Manual - Page 29

Display Format, Emergency

Get Kenwood BC550DU PDF manuals and user guides View all Kenwood BC550DU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Display Format [Analog/ NXDN/ DMR] Allows you to switch the display between the zone-channel number and the channel name. Zone-channel number Channel name PF Button: Press the programmed button to switch the display between the zone-channel number and the channel name. Menu Mode: Select "DISP FMT" and press the [ S ] button to change the Display Format setting. Emergency [Analog/ NXDN/ DMR] This is for entering Emergency Mode if the transceiver is in standby mode. If the transceiver is in Emergency mode, it exits the emergency mode. In Emergency Mode, the transceiver repeats transmission and reception at regular intervals. PF Button: Press and hold the programmed button for the time set in hold delay to enter Emergency Mode. • If transceiver is in Emergency Mode, press and hold this button for the time set in Hold Delay to exit Emergency Mode. Refer to "EMERGENCY CALLS" {p. 66}. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
29
Display Format
[Analog/ NXDN/ DMR]
Allows you to switch the display between the zone-channel number and the
channel name.
Zone-channel number
Channel name
PF Button:
Press the programmed button to switch the display between the zone-channel
number and the channel name.
Menu Mode:
Select “DISP FMT” and press the
[ S ]
button to change the Display Format setting.
Emergency
[Analog/ NXDN/ DMR]
This is for entering Emergency Mode if the transceiver is in standby mode. If the
transceiver is in Emergency mode, it exits the emergency mode. In Emergency
Mode, the transceiver repeats transmission and reception at regular intervals.
PF Button:
Press and hold the programmed button for the time set in hold delay to enter
Emergency Mode.
•
If transceiver is in Emergency Mode, press and hold this button for the time set
in Hold Delay to exit Emergency Mode.
Refer to “EMERGENCY CALLS” {p.
66
}.