Kenwood BC550DU User Manual - Page 78
BUSY CHANNEL LOCKOUT BCL, Carrier Only, Incorrect Tone, Optional, Signaling, Any RAN
View all Kenwood BC550DU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
BUSY CHANNEL LOCKOUT (BCL) If BCL is set up by your dealer, you will be unable to transmit on the channel if it is already in use. Under these circumstances, use a different channel or wait until the channel becomes free. However, if BCL Override has also been programmed, you can transmit over the current signal: 1 Press and hold the PTT switch. • If the channel is already in use, a warning tone will sound. 2 Release the PTT switch, then press and hold the PTT switch again within half a second. 3 Speak to the microphone as you would during a normal call. The transceiver transmits according to the configuration in Busy Channel Lockout by dealer. In Analog System Carrier Only Incorrect Tone Optional Signaling The transceiver cannot transmit when carrier is received. The transceiver cannot transmit when the selected channel is busy and QT/DQT is unmatched. The transceiver cannot transmit when the selected channel is busy before valid Optional Signaling matches or when the selected channel is busy and the programmed QT/DQT is not detected before valid Optional Signaling matches. In NXDN System Carrier Only Incorrect RAN Correct RAN Any RAN The transceiver cannot transmit when carrier is received. The transceiver cannot transmit when the received RAN and the RAN set in the channel is unmatched. The transceiver cannot transmit when the received RAN and the RAN set in the channel are matched. The transceiver cannot transmit while receiving RAN regardless of whether or not it matches with the RAN set in the channel. In DMR System Carrier Only Correct CC The transceiver cannot transmit when carrier is received. The transceiver cannot transmit when the received Color Code and the Color Code set in the channel are matched. 78