Kenwood BC550DU User Manual - Page 63
Non-LCD Model, Selector, Side 1
View all Kenwood BC550DU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Non-LCD Model If your transceiver is password protected, the LED will light blue when you turn the transceiver ON. Enter the password (up to 6 digits) using the following procedure. 1 Set the Selector to position "1". 2 Press the Side 1 or Side 2 button to enter the first digit. • The Side 1 button increases the digit value and the Side 2 button decreases it. The transceiver announces the digit number as it changes. 3 Repeat step 2 for Selector positions 2 ~ 6. • If there are less than 6 password digits, repeat for only the number of digits the password contains. 4 Press the PTT switch to confirm the password. • When the correct password is entered, the Blue LED turns off. 63
63
Non-LCD Model
If your transceiver is password protected, the LED will light blue when you turn the
transceiver ON. Enter the password (up to 6 digits) using the following procedure.
1
Set the
Selector
to position “1”.
2
Press the
Side 1
or
Side 2
button to enter the first digit.
•
The
Side 1
button increases the digit value and the
Side 2
button
decreases it. The transceiver announces the digit number as it changes.
3
Repeat step 2 for Selector positions 2 ~ 6.
•
If there are less than 6 password digits, repeat for only the number of digits
the password contains.
4
Press the
PTT
switch to confirm the password.
•
When the correct password is entered, the Blue LED turns off.