Kenwood BC550DU User Manual - Page 76
Background Operations, Time-out Timer (tot), Battery Saver, Low Battery Warning
View all Kenwood BC550DU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
BACKGROUND OPERATIONS TIME-OUT TIMER (TOT) The Time-out Timer is used to prevent any caller from using a channel for an extended period of time. If you continuously transmit for a period of time that exceeds the programmed time, the transceiver will stop transmitting and an alert tone will sound. To stop the tone, release the PTT switch. Your dealer can program the TOT time in the range of 15 seconds to 20 minutes. If programmed by your dealer, a pre-alert tone will sound before the timer expires. Also, if programmed by your dealer, you may have to wait for a short duration before you can continue to transmit. If you press the PTT switch before the timer has been reset, an alert tone will sound and the transceiver will not enter transmit mode. BATTERY SAVER The Battery Saver extends the battery life by reducing the battery consumption through intermittent monitoring of the presence of signals while on standby. LOW BATTERY WARNING Low Battery Warning alerts you when the battery needs to be recharged. Your dealer can set an alert tone to sound and the LED indicator to blink red when the battery power is low. When the battery power is very low, recharge or replace the battery pack. SIGNAL STRENGTH INDICATOR The signal strength indicator displays the strength of received calls. : Strong signal : Sufficient signal : Weak signal : Very weak signal 76