Kenwood BC550DU User Manual - Page 75

Semi-VOX Operation, VOX Gain Level, VOX Function], Menu], Function], <B ], C> ]

Get Kenwood BC550DU PDF manuals and user guides View all Kenwood BC550DU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

Semi-VOX Operation 1 Connect a headset to the transceiver. • The VOX function does not activate when a headset is not connected to the accessory terminal of the transceiver. 2 Press the button programmed as [VOX Function]. • Alternatively, you can press the button programmed as [Menu] to enter VOX Mode using the Menu Mode. • Beep A (1 beep) sounds and the " " indicator appears on the display. 3 To transmit, press the PTT switch. 4 Release the PTT switch. 5 Transmission continues while speaking. 6 When you finish speaking, transmission ends. To turn the Semi-VOX function OFF, press the button programmed as [VOX Function] button again. • Beep B (2 beeps) sounds and the " " indicator will disappear from the display. VOX Gain Level Sets the Microphone input sensitivity of the VOX operation. 1 Connect a headset to the transceiver. 2 Press the button programmed as [VOX]. • The current VOX Gain level appears on the display. 3 Press the [ ] button to increase or decrease the VOX Gain level. • The VOX Gain can be adjusted from levels 1 to 10. 4 While adjusting the level, speak into the headset microphone to test the sensitivity level. (Your voice is not transmitted during this test procedure.) • When sound is recognized, the LED lights yellow. 5 Press the [ S ] button to save your new setting. 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
75
Semi-VOX Operation
1
Connect a headset to the transceiver.
•
The VOX function does not activate when a headset is not connected to the
accessory terminal of the transceiver.
2
Press the button programmed as
[VOX Function]
.
•
Alternatively, you can press the button programmed as
[Menu]
to enter VOX
Mode using the Menu Mode.
•
Beep A (1 beep) sounds and the “
” indicator appears on the display.
3
To transmit, press the
PTT
switch.
4
Release the
PTT
switch.
5
Transmission continues while speaking.
6
When you finish speaking, transmission ends.
To turn the Semi-VOX function OFF, press the button programmed as
[VOX
Function]
button again.
•
Beep B (2 beeps) sounds and the “
” indicator will disappear from the display.
VOX Gain Level
Sets the Microphone input sensitivity of the VOX operation.
1
Connect a headset to the transceiver.
2
Press the button programmed as
[VOX]
.
•
The current VOX Gain level appears on the display.
3
Press the
[ <B ]
or
[ C> ]
button to increase or decrease the VOX Gain level.
•
The VOX Gain can be adjusted from levels 1 to 10.
4
While adjusting the level, speak into the headset microphone to test the
sensitivity level. (Your voice is not transmitted during this test procedure.)
•
When sound is recognized, the LED lights yellow.
5
Press the
[ S ]
button to save your new setting.