Kenwood BC550DU User Manual - Page 53
Send the GPS Data, Short Message, Speaker Attenuation, Analog/ NXDN/ DMR], NXDN/ DMR]
View all Kenwood BC550DU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Send the GPS Data [Analog/ NXDN/ DMR] Allows you to send your positioning data to the base station when a GPS speaker/ microphone has been installed. • When the power is turned ON and/or the reception condition of the GPS satellite is poor, positioning may take longer to complete. PF Button: Press the programmed button to send GPS data. • Beep A (1 beep) sounds. Menu Mode: Select "SEND GPS" and press the [ S ] button to send GPS data. • When GPS data transmission is completed and "COMPLETE" is displayed for 1 second. Short Message [NXDN/ DMR] Allows you to send short messages such as an address, telephone number, etc. 1 PF Button: Press the programmed button to enter Short Message Mode. Menu Mode: Select "SDM MODE" and press the [ S ] button to enter Short Message Mode. 2 Press the [ ] buttons to select a Short Message from the list (NXDN/ DMR). 3 Press the PTT switch or Side 2 button to send short messages. Speaker Attenuation [Analog/ NXDN/ DMR] Temporarily reduce the volume level of the speaker of the transceiver and speaker/ microphone. PF Button: Press the programmed button to change the Speaker Attenuation On or Off. 53