Kenwood KDC-BT948HD kdcx995 (pdf) - Page 51

Registering PIN Code By operating the Bluetooth device, specify the PIN code necessary for registering this unit. 1 Enter Bluetooth mode Press the [ ] button. ✍✍You can also select from "Settings" in Menu List mode. 2 Enter PIN code edit mode Turn the [VOL] knob and press it when the desired item is displayed. Select "BT Settings" > "Detailed Setup" > "PIN Code Edit". The current setting of PIN code is displayed. 3 Input the PIN code Operation type Select the numbers. Move to the next digit. Delete the last digit. Operation Turn the [VOL] knob. Press the [¢] button. Press the [4] button. 4 Register a PIN code Press the [VOL] knob. If "Completed" is displayed, registration is completed. 5 Exit BT Settings mode Press the [ ] button. ⁄ • By default, "0000" is specified. • A PIN code can be specified with up to eight digits. Selecting the Bluetooth device You Wish to Connect When two or more Bluetooth devices have already been registered, you need to select the Bluetooth device you wish to use. 1 Enter Bluetooth mode Press the [ ] button. ✍✍You can also select from "Settings" in Menu List mode. 2 Select Bluetooth device selection mode Turn the [VOL] knob and press it when the desired item is displayed. Select "BT Settings" > "Pairing" > "Phone Selection". 3 Enter Bluetooth device selection mode Press the [VOL] knob. "(name)" is displayed. 4 Select the Bluetooth device Turn the [VOL] knob. 5 Set up the Bluetooth device Press the [VOL] knob. "✱(name)" or "-(name)" is displayed. "✱": The selected Bluetooth device is busy. "-": The selected Bluetooth device is on standby. " " (blank): The Bluetooth device is deselected. 6 Exit BT Settings mode Press the [ ] button. ⁄ • If a Bluetooth device is already selected, deselect it, and then select a different one. English | 51