Kenwood KDC-BT948HD kdcx995 (pdf) - Page 7
General operation, Before Using, Common Operation, Menu List Operation, My Best 25. - device 3
UPC - 019048193643
View all Kenwood KDC-BT948HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
General operation Before Using Exit of the Demonstration Mode Turn off the demonstration mode when you use it for the first time after installation. 1 Press the [VOL] knob to quit the demonstration mode when the messages "To cancel Demo press the volume knob" are displayed (approx. 15 seconds). 2 Turn the [VOL] knob to select "YES" and press the [VOL] knob. ⁄ • Demonstration mode can also be cancelled in "DEMO Mode" of Menu List mode. Refer to (page 38). Common Operation Power and source select Turns the power ON by pressing the [SRC] button. When the power is ON, select a source. • SRC Select mode 1: Pressing the [SRC] button each time switches between sources. HD Radio ("HD RADIO") ➜ USB ("USB") or iPod ("iPod") ➜ Pandora ("Pandora") ➜ CD ("CD") ➜ Auxiliary input ("AUX") ➜ Standby ("STANDBY") ➜ HD Radio... • SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob. Keeping pressing the [SRC] button for at least 1 second turns the power OFF. ⁄ • The SRC Select mode can be set in "SRC Select" of (page 38). • Auxiliary input source is initially set to "OFF". Set "Built in AUX" described in (page 38) to "ON". • When an optional accessory is connected, the source name for each device appears. • When connection of the iPod is recognized, the source display changes from "USB" to "iPod". Volume Turning the [VOL] knob adjusts the sound volume. Menu List Operation The basic operating procedure for using this function is described below. The individual function items are covered in the operating procedures. 1 Select the source Pressing the [SRC] button repeatedly switches source. Function items vary from source to source. For a list of the function items. Refer to (page 62). 2 Enter Menu List mode Press the [MENU] button. 3 Select the setting item Turn the [VOL] knob and press it when the desired item is displayed. Repeat the operation until your desired setup item is selected. ✍✍Press the [MENU] button to return to the previous item. Operation example: Music 2 3 PlayLists 4 23 1 1 My #FTU Artists Albums Play Mode 1 [VOL] 3 [MENU] 2 [VOL] 4 [MENU] 1 sec. ... ... ... In this manual, the above selection is indicated as Select "Music" > "Playlists" > "My Best 25". 4 Make a setting • When the " PUSH " icon is displayed (at the right edge of the display) Turn the [VOL] knob to select a setting value, and then press the [VOL] knob. • When the " PUSH " icon is not displayed Press the [4] or [¢] button to select a setting value. 5 Exit Menu List mode Press the [MENU] button for at least 1 second to return to the first hierarchy. Press the [MENU] button in the first hierarchy to exit the Menu List mode. ⁄ • You cannot set the item with the " " icon displayed. English | 7