Kenwood TK-3180 Instruction Manual - Page 30
CH/GID, Telephone, Disconnect
View all Kenwood TK-3180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
PLACING A TELEPHONE CALL 1 Select the desired zone and group ID using the selector and the Zone or CH/GID keys. • Alternatively, you can press the key programmed as Auto Telephone to automatically search for a Telephone Repeater. 2 Press and hold the PTT switch for approximately 1 second to ensure a connection. • Confirm that there is a dial tone after you release the PTT switch. 3 Place the call, following the instructions for making a DTMF call, starting on page 32. 4 When the called party responds, press the PTT switch and speak into the microphone. Release the PTT switch to receive. • Only one person can speak at a time. 5 To end the call, press and hold the PTT switch, then press the # key or the key programmed as Telephone Disconnect. RECEIVING A TELEPHONE CALL 1 When a telephone call is received, the transceiver will automatically change to the correct group ID and you will hear the call. • A ringer tone will sound when a call is received. 2 Press and hold the PTT switch to speak, and release it to receive. • Only one person can speak at a time. 3 To end the call, press and hold the PTT switch, then press the # key or the key programmed as Telephone Disconnect. 20