Kenwood TK-3180 Instruction Manual - Page 51
return to Normal Operation Mode. - reset
View all Kenwood TK-3180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
CLOCK If activated by your dealer, your transceiver can track the time and date with its built-in clock. The time will display momentarily when the transceiver power is turned ON. Additionally, you can view the clock any time by pressing the key programmed as Clock. Note: Removing the battery pack or leaving the battery pack uncharged for extended periods will cause the clock time to clear. ■ CLOCK SETUP To set the year, month, day, and time: 1 With the transceiver power OFF, press and hold the C> key while turning the transceiver power ON. • The current year setting appears. 2 Rotate the selector to select the year, then press the S key to cycle to the month setting. • Repeat this step, to cycle through the day, hour, and minute settings. 3 Press the S key again, to return to the year setting. • A triple beep will sound, indicating that your selections have been set into the transceiver memory. 4 Turn the transceiver power OFF and then back ON to return to Normal Operation Mode. BACKLIGHT To turn the transceiver display backlight on, press the key programmed as Lamp. • Pressing any key other than the PTT switch and the Power switch/ Volume control while the backlight is on will reset the lamp timer, allowing the backlight to remain lit for an additional 5 seconds. To turn the display backlight off immediately, press the Lamp key while the backlight is on. 41