Kenwood TK-3180 Instruction Manual - Page 43
Enter the desired name using the selector or keypad.
View all Kenwood TK-3180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
STORE AND SEND Store and send allows you to make DTMF calls without the need for a DTMF keypad. 1 Press the key programmed as Autodial. • " " appears on the display. 2 Rotate the selector to select a digit. • Alternatively, you can enter the digits by using the DTMF keypad (keypad models only). 3 Press the C> key to accept the entered digit and move to the next digit. • Press the A or # key to delete an incorrect character. Press and hold the A or # key to delete all entered characters. • You can enter up to 30 digits. 4 Press the PTT switch to make the call after the entire number is entered. AUTODIAL Autodial allows you to store 32 names (up to 12 characters per name) and DTMF numbers (up to 16 digits per number). ■ STORING DTMF NUMBERS 1 Press the key programmed as Autodial Programming. • The first entry in the Autodial list appears on the display. 2 Rotate the selector, press the keys, or press the appropriate DTMF key (01 ~ 32) to select your desired Autodial list number. 3 Enter the desired name using the selector or keypad. Rotate the selector or press the keypad to select a character, then press the C> key to confirm the character and move the cursor to the right. Repeat this operation until the complete name is entered, then press the S key to confirm the entry. • Press the A or # key to delete an incorrect character. 33