Kenwood TK-3180 Instruction Manual - Page 40

select the status ID you want to transmit.

Get Kenwood TK-3180 PDF manuals and user guides View all Kenwood TK-3180 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

■ TRANSMITTING 1 Select your desired zone and group (or zone and channel). 2 Press the key programmed as Status to enter Status Mode or Selcall + Status to enter Selcall Mode. • When using the Status key to enter Status Mode, the target Fleet/ ID is fixed and cannot be selected. Skip to step 5 to continue. 3 In Selcall Mode, rotate the selector or press the keys to select the ID of the station you want to call. • If Manual Dialing is enabled, you can enter digits by using the DTMF keypad or by selecting digits with the selector. When using the selector, rotate it to select a digit, then press the C> key to accept the digit and shift the cursor to the right. Repeat this process until the entire ID is entered. 4 Press the S key to enter Status Mode. 5 Rotate the selector or press the keys to select the status ID you want to transmit. • If Manual Dialing is enabled, you can enter digits by using the DTMF keypad or by selecting digits with the selector. To enter manual input mode, first press and hold the S key. When using the selector, rotate it to select a digit, then press the C> key to accept the digit and shift the cursor to the right. Repeat this process until the entire ID is entered. 6 Press the PTT switch or Side 2 key to initiate the Status call. • " " is displayed when the call has been successfully transmitted. ■ RECEIVING The icon will flash and a calling ID or text message will appear when a Status call is received. Press any key to return to Normal Operation Mode. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
30
■
T
RANSMITTING
1
Select your desired zone and group (or zone and
channel).
2
Press the key programmed as
Status
to enter Status
Mode or
Selcall + Status
to enter Selcall Mode.
•
When using the
Status
key to enter Status Mode, the
target Fleet/ ID is fixed and cannot be selected.
Skip to
step 5 to continue.
3
In Selcall Mode, rotate the selector or press the
<B
and
C>
keys to select the ID of the station you want to call.
•
If Manual Dialing is enabled, you can enter digits by using
the DTMF keypad or by selecting digits with the selector.
When using the selector, rotate it to select a digit, then
press the
C>
key to accept the digit and shift the cursor to
the right. Repeat this process until the entire ID is entered.
4
Press the
S
key to enter Status Mode.
5
Rotate the selector or press the
<B
and
C>
keys to
select the status ID you want to transmit.
•
If Manual Dialing is enabled, you can enter digits by using
the DTMF keypad or by selecting digits with the selector.
To enter manual input mode, first press and hold the
S
key. When using the selector, rotate it to select a digit, then
press the
C>
key to accept the digit and shift the cursor to
the right. Repeat this process until the entire ID is entered.
6
Press the
PTT
switch or
Side 2
key to initiate the Status
call.
•
“
” is displayed when the call has been
successfully transmitted.
■
R
ECEIVING
The
icon will flash and a calling ID or text message will
appear when a Status call is received.
Press any key to return to Normal Operation Mode.