Kenwood TK-3180 Instruction Manual - Page 33
Operator Selectable Tone Voice Operated Transmission
View all Kenwood TK-3180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
OPERATOR SELECTABLE TONE (OST) You can change the preset encode and decode tones for the selected channel. Your dealer can program up to 40 tones on your transceiver. To turn OST on or off, press the key programmed as OST. • The OST indicator ( this function is activated. ) appears on the display when To change the preset encode/ decode tones: 1 Press and hold the key programmed as OST for approximately 1 second. • The OST number and name appear on the display. 2 Press the keys to select your desired encode/ decode pair. • Alternatively, you can enter the list number by using the DTMF keypad (keypad models only). 3 Press the S key to accept the new setting and return to normal operation. VOICE OPERATED TRANSMISSION (VOX) VOX can be activated or deactivated by your dealer. VOX operation allows you to transmit hands-free. This feature can only be used if you are using a supported headset. When operating VOX, you must set a VOX Gain level. This setting allows the transceiver to recognize sound levels. If the microphone is too sensitive, it will begin transmitting when there is noise in the background. If it is not sensitive enough, it will not pick up your voice when you begin speaking. Be sure to adjust the VOX Gain level to an appropriate sensitivity to allow smooth transmission. To set the VOX Gain level, perform the following steps: 1 Connect the headset to the transceiver. • The VOX function does not activate when a headset is not connected to the accessory terminal of the transceiver. 23