Kenwood TK-3180 Instruction Manual - Page 37
Priority Scan Group Scan
View all Kenwood TK-3180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
PRIORITY SCAN A Priority channel must be programmed in order for Priority Scan to function. The transceiver will automatically change to the Priority channel when a signal is received on it, even if a signal is being received on a normal channel. • The indicator represents the Priority 1 channel. • The indicator represents the Priority 2 channel. • The indicator represents both the Priority 1 and Priority 2 channel. Note: Priority cannot be programmed onto the group ID of a Trunking zone; it can be used only on channels of Conventional zones. GROUP SCAN Group Scan is useful when more than one channel/ group ID is programmed in a zone. Group Scan is set by your dealer on request. It scans the revert groups as well as groups that are allowed to be scanned. When a call is received, the group indicator shows the channel/ group ID, and that group becomes the revert group. Simply press the PTT switch to respond to the call. 27