Kenwood TK-3180 Instruction Manual - Page 42
Dtmf Dual Tone Multi Frequency Calls
View all Kenwood TK-3180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
DTMF (DUAL TONE MULTI FREQUENCY) CALLS MANUAL DIALING (KEYPAD MODELS ONLY) ■ METHOD 1 Press and hold the PTT switch, then enter the desired digits using the front panel keypad. • If you release the PTT switch, transmit mode will end even if the complete number has not been sent. • If your dealer has activated the Keypad Auto PTT function, you need not press the PTT switch while pressing the keys on the keypad in Conventional systems. The DTMF code will be sent automatically when you press a key. Note: Keypad Auto PTT does not function in Trunking systems. ■ METHOD 2 Enter the desired digits using the front panel keypad (maximum of 30 digits). After entering the complete number, press the PTT switch. • In Conventional systems, the DTMF code is transmitted after pressing the PTT switch. • In Trunking systems, the DTMF code is transmitted after a connection is established. Releasing the PTT switch before a connection is established will stop the transmission from occurring. • In RIC (Repeater Inter-Connect) Trunking systems, the DTMF code is transmitted after a connection with the telephone system is established. Press the key programmed as Autodial (instead of the PTT switch) to automatically connect to the repeater and transmit the DTMF code. Note: If you switch the power OFF before sending the number, the number will be cleared from memory. 32