Kenwood TK-3180 Instruction Manual - Page 46
When the transceiver receives a call containing a stun code
View all Kenwood TK-3180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
DTMF SIGNALING DTMF Signaling is either enabled or disabled by your dealer. This function opens the squelch only when the transceiver receives the DTMF code programmed in your transceiver. Each transceiver is normally programmed with a unique code. You will not hear calls from transceivers that are not programmed with a matching code. When you receive a signal containing the correct tones, squelch opens and you will hear the call. • The LED indicator flashes orange. • To mute the speaker after squelch opens, press the key programmed as Monitor. • Your dealer can program the squelch to close again after a specific time period elapses. • If Transpond for DTMF Signaling is programmed, an acknowledgment signal is returned to the calling station. • If Tone Alert for DTMF Signaling is programmed, an alert tone will sound when the correct tones are received. STUN This function is used when a transceiver is stolen or lost. When the transceiver receives a call containing a stun code, either transmit mode will be disabled, or both receive mode and transmit mode will be disabled. Stun is cancelled when the transceiver receives a call with a revive code. 36