Konica Minolta Fujitsu fi-7160 Operation Guide - Page 118
Cleaning the Carrier Sheet
View all Konica Minolta Fujitsu fi-7160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Chapter 6 Daily Care 6.4 Cleaning the Carrier Sheet The Carrier Sheet should be cleaned with either a piece of dry cloth, a cloth moistened with Cleaner F1, or a sheet of Cleaning Wipe. Gently wipe the dirt and dust off the surface and the inside of the Carrier Sheet. As you keep using the Carrier Sheet, dirt and dust will accumulate on the surface and the inside. Clean it regularly because it may result in scanning errors. ATTENTION Make sure that the Carrier Sheet is not creased. To avoid deformation and discoloration, never use paint thinner or any other organic solvents. Do not use force to rub against the Carrier Sheet because it may be damaged or deformed. After cleaning the inside, do not close the Carrier Sheet until it is completely dry. The Carrier Sheet should be replaced approximately every 500 scans. For information on purchasing the Carrier Sheet, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 118