Konica Minolta Fujitsu fi-7160 Operation Guide - Page 128

Chapter 8 Troubleshooting 8.1 Paper Jam When your document is jammed inside the scanner, remove the document in the following procedure.  Do not use force to pull out the jammed document, and make sure to open the ADF first.  Be careful not to touch any sharp parts upon removing jammed documents.  Be careful not to get your accessories (e.g. ties, necklaces) or hair caught inside the scanner.  The glass surface may become extremely hot during operation. 1 Remove all documents from the ADF paper chute (feeder). 2 Open the ADF. For details, refer to "1.4 Opening/Closing the ADF" (page 27). When opening, the ADF might close accidentally. Be careful not to have your fingers caught when the ADF closes. 3 Remove the jammed document. ATTENTION  Make sure to check the documents and the paper path thoroughly. Remove any metal objects such as staples and paper clips to prevent paper jams.  Be careful not to damage the glass surface and the guides when removing documents with metal objects such as staples or paper clips. 4 Close the ADF. For details, refer to "1.4 Opening/Closing the ADF" (page 27). Be careful not to have your fingers caught when closing the ADF. TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 128