Konica Minolta Fujitsu fi-7160 Operation Guide - Page 194

Chapter 9 Operational Settings 3 Select a paper protection detection method which you want to change the sensitivity level for. Feeding Accuracy :Select this to detect a document that is unusually warped when a feeding error occurs. This is available when you have selected [Feeding Accuracy] or [Feeding Accuracy & Noise] for the paper protection detection method. Feeding Noise :Select this to detect paper jam noise. This is available when you have selected [Feeding Noise] or [Feeding Accuracy & Noise] for the paper protection detection method. 4 Specify the sensitivity level. Low: Decreases the sensitivity level to detect warped documents or paper jam noise. Normal: Monitors warped documents or paper jam noise in normal sensitivity. Keep this setting for normal use. High: Increases the sensitivity level to detect warped documents or paper jam noise. HINT  To detect paper warp or paper jam noise faster and stop the scan, select [High].  To decrease the frequency of paper jam detection if paper jams occur frequently in the feeder, select [Low].  This setting can also be configured in the operator panel. When the operation panel setting is prioritized, the operator panel setting is prioritized over the Software Operation Panel setting. TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 194