Konica Minolta Fujitsu fi-7160 Operation Guide - Page 20
fi-7260/fi-7280, Front
View all Konica Minolta Fujitsu fi-7160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 1 Scanner Overview fi-7260/fi-7280 ■Front Side guides Guides the documents in width direction as they are fed into the scanner. ADF (Automatic Document Feeder) Pulls and feeds the documents one sheet at a time from the ADF paper chute (feeder). Open to replace consumables or clean the inside of the scanner. Stopper Lift up to adjust to the document length. Stacker Stacks up the ejected documents. Transport lock switch Locks the carrier unit (which is inside the flatbed) to prevent damage during transportation. Flatbed For scanning documents (e.g. thin paper, books) that cannot be scanned with the ADF. Chute extension 2 Pull out to adjust to the document length. Chute extension 1 Pull out to adjust to the document length. ADF paper chute (feeder) Holds the documents to be scanned. ADF release tab Pull this tab to open the ADF. TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Operator panel Consists of an LCD, buttons, and LED indicator. Can be used to operate the scanner or check the status. For details, refer to "Chapter 4 How to Use the Operator Panel" (page 61). Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 20