Konica Minolta Kodak i730 User Guide - Page 37
Replacing the blotter strips, Carefully pull the blotter strips off the transport. You can replace
View all Konica Minolta Kodak i730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Replacing the blotter strips Blotter strips collect ink overflow. They should be replaced when there is a build-up of ink. Replacement blotter strips may be purchased through your supplier. 1. Open the pod. 2. Locate the two ink blotter strips. Ink blotter strips 3. Carefully pull the blotter strip(s) off the transport. You can replace one or both of the strips as necessary. 4. Discard the soiled strip(s) 5. Peel the backing away from a new blotter strip. 4-6 A-61500 May 2010
4-6
A-61500
May 2010
Replacing the blotter
strips
Blotter strips collect ink overflow. They should be replaced when there
is a build-up of ink. Replacement blotter strips may be purchased
through your supplier.
1.
Open the pod.
2.
Locate the two ink blotter strips.
3.
Carefully pull the blotter strip(s) off the transport. You can replace
one or both of the strips as necessary.
4.
Discard the soiled strip(s)
5.
Peel the backing away from a new blotter strip.
Ink blotter strips