Home » Konica Minolta Manuals » Scanners » Konica Minolta MS6000 MK II » Manual Viewer

Konica Minolta MS6000 MK II MS6000 MKII MSP3500 User Manual - Page 132

The Auto Format Select Print Function is, Disabling Auto Switching: A paper empty

View all Konica Minolta MS6000 MK II manuals

Add to My Manuals
Save this manual to your list of manuals

Page 132 highlights

7-14 2. Initial Settings System Settings Description Selection Initial Setting The print After a toner empty condition or toner Empty >> * function at the cartridge life is detected, this function Disable time of Toner allows you to select either to stop printing Print Life Empty or Toner or continue printing. >> Disable Cartridge Life * Toner cartridge life detection is only detection connected with MSP3500. (PR mode only) (When selected the enable print after Print Empty >> Enable the Toner Catridge life fulfillment, Print Life while depress the Start key, LED dis- >> Disable plays the toner cartridge life fulfillment Print "TE".) Empty >> Enable Print Life >> Enable Print Auto Film Format Select print function (PR mode only) The Auto Format Select Print Function is enable or disable through the control panel. Enable Disable * (200V) * (120V) 90 degree Enables the prism to rotate the screen Enable rotation setting image 90 degrees. Disable * Automatic paper Allows you to specify the paper source Auto * source switching when Letter or A4 size paper is loaded in switching (PR mode only) Lengthwise or Crosswise orientations into the both paper feeding tray and paper feeding cassette. Auto switching: Printing continues by Disabling Auto Switching automatically switching to the remaining paper source after paper in the specified paper source runs out. Disabling Auto Switching: A paper empty mode occurs and printing ceases after paper in the specified paper source runs out. The paper source must be refilled or the paper source must be switched by pressing the Output Selection Key in order to resume printing. * To change any of the system settings described above, contact the authorized dealer. Miscellaneous Chapter 7

Section	Page
SAFETY INFORMATION	3
Warning and Precaution Symbols	3
Meaning of Symbols	3
Precautions for Routine	7
Welcome	9
Contents	21
Safety Notes	25
1. Installation Precautions	26
Installation Site	26
Power Source	26
Grounding	26
Space Requirements	27
Operating Environment	29
Using the Printer	29
Care of Printer Supplies	29
2. Turning the Power On and Off	30
Turning ON	30
Turning OFF	31
3. Auto Power Save Mode	32
Scanner	33
1. System Overview	34
System Configuration	35
2. Parts of the Scanner	36
3. Control Panel Keys and Indicators	37
Control Panel (Basic)	37
Control Panel (Shift Function)	43
When (Misfeed/Call-Tech.-Rep. Code) Lights up	45
4. Image Processing Functions	49
5. Printing/Scanning	51
6. Selecting a Projection Lens	52
7. Replacing the Projection Lens	53
8. Zooming and Focusing	54
Zooming of the Screen Image	54
Focusing of the Screen Image	54
9. Image Rotation	55
Auto Image Rotation:	55
10. Selecting the Film Type	56
Auto	56
Nega (negative film)	56
Posi (positive film)	56
11. Selecting the Image Density	57
Using Auto Exposure	57
Using Manual Exposure	57
12. Setting the Number of Prints to be Made	58
To Entry the Number of Prints	58
Correcting Entry	58
13. Selecting the Output Format	59
Selecting the paper source	59
Selecting the print format	60
14. Using Auto Masking	61
Selecting Auto Masking	61
Operating Conditions for Auto Masking	61
15. Manual Masking Panels (Optional)	62
16. Using Manual Masking	63
Selecting Trimming	63
Defining the Print Area	63
Clearing a Defined Print (Scan) Area	64
Selecting Masking	64
17. Using Centering and Fit	65
Centering	65
Fit	65
18. Using the Cycle Print Mode	66
Specifying the interval between scanning operations	66
Operating in the Cycle Print Mode	67
19. Selecting the Connection Mode	68
20. Selecting the Resolution	69
21. Registering the Job Program	70
22. Calling the Job Program	71
23. Using the Electrical Zoom	72
Zoom +	72
Zoom -	72
Clearing the Zoom magnification	73
24. Adjusting the Illumination of the Screen	74
25. Replacing the Projection Lamp	75
MSP 3500 Printer	77
1. Parts of the Printer	78
2. Paper Specifications	80
3. Set the Paper	81
Loading Paper into the Paper Feeding Tray	81
Loading Paper in the Paper Cassette	82
4. Replacing the Toner Cartridge	85
5. Replacing the Exhaust Filter	88
6. When the Paper Misfeed Indicator Lights Up	89
If the Misfeed Indicator lights up along with a P0 code:	89
If the Misfeed Indicator lights up along with a P1, P2 or P3 code:	89
Clearing a Misfeed from the Paper Feeding Tray	90
Clearing a Misfeed from the Paper Cassette	91
Clearing a Misfeed from inside the Printer	92
Clearing a Misfeed from output bin	94
MSP 3000 Printer	95
1. Parts of the Printer	96
2. Paper Specifications	98
Use only the following types of paper	98
3. Set the Paper	99
Loading Paper into the Paper Feeding Tray	99
Loading Paper in the Paper Cassette	100
4. Replacing the Toner Cartridge	101
5. When the Paper Misfeed Indicator Lights Up	103
If the Misfeed Indicator lights up along with a P0 code:	103
If the Misfeed Indicator lights up along with a P1, P2 or P3 code:	103
Clearing a Misfeed from the Paper Feeding Tray	104
Clearing a Misfeed from the Paper Cassette	105
Clearing a Misfeed from inside the Printer	106
Troubleshooting	107
1. Solving Irregular Printing Problems	108
Maintenance	111
1. System Care	112
Cleaning the Scanner Screen	112
Outer Covers	112
Carrier Glass (Option)	112
Cleaning the System Printer (Option)	113
Cleaning the MSP 3500 Printer	113
Cleaning the Printer Exterior	114
Cleaning the Printer Interior	114
Paper Pickup Rollers	115
Cleaning the MSP 3000 Printer	118
Miscellaneous	119
1. Specifications	120
PC Mode	121
PR Mode : MSP 3500 Printer	121
PR Mode : MSP 3000 Printer	122
2. Initial Settings	123
User Settings on the Control Panel	123
User Mode	124
Entering and Leaving the User Mode	125
Settings in Each User Mode Function	126
System Settings by the dealer	130

Match case Limit results 1 per page

2. Initial Settings

7-14

Miscellaneous

Chapter 7

To change any of the system settings described above, contact the authorized dealer.

The print

function at the

time of Toner

Empty or Toner

Cartridge Life

detection

(PR mode only)

After a toner empty condition or toner

cartridge life is detected, this function

allows you to select either to stop printing

or continue printing.

Toner cartridge life detection is only

connected with MSP3500.

(When selected the enable print after

the Toner Catridge life fulfillment,

while depress the Start key, LED dis-

plays the toner cartridge life fulfillment

“TE”.)

Empty >>

Disable

Print Life

>> Disable

Empty >>

Enable

Print Life

>> Disable

Empty >>

Enable

Print Life

>> Enable

Auto Film

Format Select

print function

(PR mode only)

The Auto Format Select Print Function is

enable or disable through the control

panel.

Enable

* (200V)

Disable

* (120V)

90 degree

rotation setting

Enables the prism to rotate the screen

image 90 degrees.

Enable

Disable

Automatic paper

source switching

(PR mode only)

Allows you to specify the paper source

when Letter or A4 size paper is loaded in

Lengthwise or Crosswise orientations into

the both paper feeding tray and paper

feeding cassette.

Auto switching: Printing continues by

automatically switching to the remaining

paper source after paper in the specified

paper source runs out.

Disabling Auto Switching: A paper empty

mode occurs and printing ceases after

paper in the specified paper source runs

out. The paper source must be refilled or

the paper source must be switched by

pressing the Output Selection Key in

order to resume printing.

Auto

switching

Disabling

Auto

Switching

System Settings

Description

Selection

Initial Setting