Konica Minolta MS6000 MK II MS6000 MKII MSP3500 User Manual - Page 32
Auto Power Save Mode, The Auto Power Save Mode can also be disabled. Ask the authorized Technical
View all Konica Minolta MS6000 MK II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Safety Notes Chapter 1 1-8 3. Auto Power Save Mode The unit enters the Auto Power Save mode if it is left to stand idle for a predetermined period of time. When the unit enters the Auto Power Save mode, power to the Scanner projection lamp and the printer heater is automatically shut down to save power consumption. A User Mode function is available that allows the user to set the time it takes the unit to enter the Auto Power Save mode. The setting options are as follows: • Auto Power Save (15 min.) • Auto Power Save (30 min.) • Auto Power Save (60 min.) NOTE The Auto Power Save Mode can also be disabled. Ask the authorized Technical Representative if you want to disable this function. Segments of the Multi-Print Display light up and go out sequentially in the clockwise direction when the unit is in the Auto Power Save mode. To let the unit leave the Auto Power Save mode, press any key on the control panel. At this time, the Scanner projection lamp lights up steadily and the printer is set into the warm-up condition. NOTE For the USA and Canada only: The Auto Power Save function becomes available for setting only if the Energy Miser kit is mounted on the Scanner.