Home » Konica Minolta Manuals » Scanners » Konica Minolta MS6000 MK II » Manual Viewer

Konica Minolta MS6000 MK II MS6000 MKII MSP3500 User Manual - Page 81

Set the Paper, Loading Paper into the Paper Feeding Tray, Loading Paper into the Paper

View all Konica Minolta MS6000 MK II manuals

Add to My Manuals
Save this manual to your list of manuals

Page 81 highlights

3. Set the Paper Loading Paper into the Paper Feeding Tray 1 Open the paper feeding tray. 3-5 ATTENTION Do not load paper above the fill limit mark on the inside left of the tray, or it may not feed correctly. The paper feeding tray holds approximately 200 sheets of 20 lb bond (75 g/m2) paper. 4 While pressing the button on the right side of the media guide ➀, slide the media guide to adjust it ➁. 2 Fan a stack of paper. MSP 3500 Printer Chapter 3 3 Align the edges of the paper, and then load it with its printing-side up. Often, an arrow on the paper package label indicates the printing-side of the media. ATTENTION Make sure the paper fit easily between the guides. Improperly adjusted guides may cause poor print quality, paper jams, or printer damage.

Section	Page
SAFETY INFORMATION	3
Warning and Precaution Symbols	3
Meaning of Symbols	3
Precautions for Routine	7
Welcome	9
Contents	21
Safety Notes	25
1. Installation Precautions	26
Installation Site	26
Power Source	26
Grounding	26
Space Requirements	27
Operating Environment	29
Using the Printer	29
Care of Printer Supplies	29
2. Turning the Power On and Off	30
Turning ON	30
Turning OFF	31
3. Auto Power Save Mode	32
Scanner	33
1. System Overview	34
System Configuration	35
2. Parts of the Scanner	36
3. Control Panel Keys and Indicators	37
Control Panel (Basic)	37
Control Panel (Shift Function)	43
When (Misfeed/Call-Tech.-Rep. Code) Lights up	45
4. Image Processing Functions	49
5. Printing/Scanning	51
6. Selecting a Projection Lens	52
7. Replacing the Projection Lens	53
8. Zooming and Focusing	54
Zooming of the Screen Image	54
Focusing of the Screen Image	54
9. Image Rotation	55
Auto Image Rotation:	55
10. Selecting the Film Type	56
Auto	56
Nega (negative film)	56
Posi (positive film)	56
11. Selecting the Image Density	57
Using Auto Exposure	57
Using Manual Exposure	57
12. Setting the Number of Prints to be Made	58
To Entry the Number of Prints	58
Correcting Entry	58
13. Selecting the Output Format	59
Selecting the paper source	59
Selecting the print format	60
14. Using Auto Masking	61
Selecting Auto Masking	61
Operating Conditions for Auto Masking	61
15. Manual Masking Panels (Optional)	62
16. Using Manual Masking	63
Selecting Trimming	63
Defining the Print Area	63
Clearing a Defined Print (Scan) Area	64
Selecting Masking	64
17. Using Centering and Fit	65
Centering	65
Fit	65
18. Using the Cycle Print Mode	66
Specifying the interval between scanning operations	66
Operating in the Cycle Print Mode	67
19. Selecting the Connection Mode	68
20. Selecting the Resolution	69
21. Registering the Job Program	70
22. Calling the Job Program	71
23. Using the Electrical Zoom	72
Zoom +	72
Zoom -	72
Clearing the Zoom magnification	73
24. Adjusting the Illumination of the Screen	74
25. Replacing the Projection Lamp	75
MSP 3500 Printer	77
1. Parts of the Printer	78
2. Paper Specifications	80
3. Set the Paper	81
Loading Paper into the Paper Feeding Tray	81
Loading Paper in the Paper Cassette	82
4. Replacing the Toner Cartridge	85
5. Replacing the Exhaust Filter	88
6. When the Paper Misfeed Indicator Lights Up	89
If the Misfeed Indicator lights up along with a P0 code:	89
If the Misfeed Indicator lights up along with a P1, P2 or P3 code:	89
Clearing a Misfeed from the Paper Feeding Tray	90
Clearing a Misfeed from the Paper Cassette	91
Clearing a Misfeed from inside the Printer	92
Clearing a Misfeed from output bin	94
MSP 3000 Printer	95
1. Parts of the Printer	96
2. Paper Specifications	98
Use only the following types of paper	98
3. Set the Paper	99
Loading Paper into the Paper Feeding Tray	99
Loading Paper in the Paper Cassette	100
4. Replacing the Toner Cartridge	101
5. When the Paper Misfeed Indicator Lights Up	103
If the Misfeed Indicator lights up along with a P0 code:	103
If the Misfeed Indicator lights up along with a P1, P2 or P3 code:	103
Clearing a Misfeed from the Paper Feeding Tray	104
Clearing a Misfeed from the Paper Cassette	105
Clearing a Misfeed from inside the Printer	106
Troubleshooting	107
1. Solving Irregular Printing Problems	108
Maintenance	111
1. System Care	112
Cleaning the Scanner Screen	112
Outer Covers	112
Carrier Glass (Option)	112
Cleaning the System Printer (Option)	113
Cleaning the MSP 3500 Printer	113
Cleaning the Printer Exterior	114
Cleaning the Printer Interior	114
Paper Pickup Rollers	115
Cleaning the MSP 3000 Printer	118
Miscellaneous	119
1. Specifications	120
PC Mode	121
PR Mode : MSP 3500 Printer	121
PR Mode : MSP 3000 Printer	122
2. Initial Settings	123
User Settings on the Control Panel	123
User Mode	124
Entering and Leaving the User Mode	125
Settings in Each User Mode Function	126
System Settings by the dealer	130