Konica Minolta MS6000 MK II MS6000 MKII MSP3500 User Manual - Page 44

2-12 3. Control Panel Keys and Indicators Scanner Chapter 2 User Mode Key: Pressing this key together with the Shift Key enters the unit into the User Mode. ☞ See p. 7-6 User Mode. Lamp Illuminance Key: When this key is pressed together with the Shift Key, the illumination of the screen is adjusted. When this key is continuously pressed, the screen is gradually darkened until it is turned OFF. When any key is pressed then, the illumination returns to the maximum level. Resolution Key: When this key is pressed together with the Shift Key, the resolution of the Scanner is set. When the Scanner is connected to the MSP 3500 Printer: 6H When the Scanner is connected to the MSP 3000 Printer: 4H and 6H When the Scanner is connected to the PC: 2H, 3H, 4H, 6H and 8H * 4H represents 400dpi and 6H represents 600dpi. Job Recall Key: When this key is pressed together with the Shift Key, the program registration locations (1J, 2J and 3J) are called. Each time this key is pressed while the Shift Key is held down, the display is switched in order of 1J → 2J → 3J. Zoom Key: When this key is pressed together with the Shift Key, the electrical zoom magnification is set. Zoom+: When this key is pressed together with the Shift Key, the magnification is increased by an increment of 0.01X (up to 2.00X). Zoom clr: When this key is held down together with the Shift Key for one second, the standard magnification is resumed. Zoom-: When this key is pressed together with the Shift Key, the magnification is decreased by a decrement of 0.01X (down to 0.50X). Shift Key: Executes an expansion function when being pressed together with the intended function key. PC/PR Key: When this key is pressed together with the Shift Key, the connection to the PC or to the Printer is selected. * This key is not valid unless the USB interface kit (option- al) is installed.