Konica Minolta MS6000 MK II MS6000 MKII MSP3500 User Manual - Page 42
Control Panel Keys and Indicators, Memory Input Key, Clear/Stop Key, Multi-Print Keys, Start Key
View all Konica Minolta MS6000 MK II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
2-10 3. Control Panel Keys and Indicators Scanner Chapter 2 Memory Input Key: To store one of the following functions into the memory of the Scanner, first set one of the functions on Control Panel and then press this button with the head of a pen or other device. The next time the scanner is turned ON, that function will appear as a default setting until a new one is entered. (Maximum three kind of setting can be memorized.) 1) Negative or positive 2) Print mode 3) Output Format 4) Print image density 5) Exposure mode 6) Centering or Fit 7) Masking 8) Auto Skew Correction 9) Horizontal Area setting 10) Vertical Area setting 11) Electrical Zoom 12) Resolution 13) Image Distortion Correction NOTE If you do not press the pinhole for at least 60 seconds after a setting has been made with the Auto Reset function set to ON, the previous setting remains valid. Clear/Stop Key: Multi-Print Keys: Start Key: Press to clear the setting on the Multi-Print Display, resetting it to "1" or to stop a multi-print cycle. This key is used to set the number of prints when printing continuous, multiple pages. The value of this setting increases by one (1, 2, 3...) with every push of the key. (Maximum 19) * PR mode only. Press to make a print (scan) of the image shown on the Screen.