Konica Minolta bizhub 3300P bizhub 3300P User Guide - Page 193
Job prints from the wrong tray or on the wrong paper, Step 1, Settings, Paper Menu
View all Konica Minolta bizhub 3300P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
User's Guide Job prints from the wrong tray or on the wrong paper Actions Step 1 1. Check if you are printing on paper that is supported by the tray. 2. Resend the print job. Yes No The problem is solved. Go to step 2. Does the job print from the correct tray or on the correct paper? Step 2 1. From the Paper menu, set the paper size and type to match the paper loaded in the tray. To access the Paper menu, do either of the following: The problem is solved. - If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings >Paper Menu. Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. - If the printer is connected to a computer by a USB cable, then open the Local Printer Settings Utility for Windows or Printer Settings for Macintosh. 2. Resend the print job. Go to step 3. Does the job print from the correct tray or on the correct paper? Step 3 1. Depending on your operating system, open Printing Preferences or the Print dialog, and then specify the paper type. The problem is solved. 2. Resend the print job. Contact technical support. Does the job print from the correct tray or on the correct paper? - 193 -