Konica Minolta bizhub 3300P bizhub 3300P User Guide - Page 194
Incorrect characters print, Step 1, Settings, Network/Ports, Standard Network, Network [x]
View all Konica Minolta bizhub 3300P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
User's Guide Incorrect characters print Action Step 1 Check if the printer control panel light sequence matches the light sequence in the following illustration: Yes Turn off the printer, and then turn it back on to deactivate Hex Trace mode. No Go to step 2. Hex Trace - Slowly blinking Do both light sequences match? Step 2 1. Open a Web browser, and then type the printer IP address in the address field. 2. Click Settings >Network/Ports, and then click Standard Network or Network [x]. 3. Select PCL SmartSwitch or PS SmartSwitch, and then click Submit. 4. Resend the print job. Contact technical support. Do incorrect characters print? The problem is solved. - 194 -
User's Guide
- 194 -
Incorrect characters print
Action
Yes
No
Step 1
Check if the printer control panel light sequence matches
the light sequence in the following illustration:
Hex Trace
- Slowly blinking
Do both light sequences match?
Turn off the printer, and then turn it
back on to deactivate Hex Trace
mode.
Go to step 2.
Step 2
1.
Open a Web browser, and then type the printer IP
address in the address field.
2.
Click
Settings
>
Network/Ports
, and then click
Standard Network
or
Network [x]
.
3.
Select
PCL SmartSwitch
or
PS SmartSwitch
, and
then click
Submit
.
4.
Resend the print job.
Do incorrect characters print?
Contact
technical support
.
The problem
is solved.