Konica Minolta bizhub 3300P bizhub 3300P User Guide - Page 73
Network/Ports menu, Standard Network
View all Konica Minolta bizhub 3300P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
User's Guide Network/Ports menu Standard Network Note: Only active ports appear in this menu. All inactive ports are omitted. Use PCL SmartSwitch On Off PS SmartSwitch On Off NPA Mode Off Auto Network Buffer Auto 3KB to [maximum size allowed] To Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language. Notes: • On is the factory default setting. • When Off is used, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off. Set the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language. Notes: • On is the factory default setting. • When Off is used, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off. Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol. Note: Auto is the factory default setting. Set the size of the network input buffer. Notes: • Auto is the factory default setting. • The value can be changed in 1-KB increments. • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off. • To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel, serial, and USB buffers. - 73 -