Konica Minolta bizhub 3300P bizhub 3300P User Guide - Page 89
Timeouts, Notes, Error Recovery, Max Auto Reboots
View all Konica Minolta bizhub 3300P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Use Timeouts Wait Timeout Disabled 15-65535 sec Error Recovery Auto Reboot Reboot when idle Reboot always Reboot never Error Recovery Max Auto Reboots 1-20 Print Recovery Auto Continue Disabled 5-255 sec Print Recovery Jam Recovery On Off Auto User's Guide To Set the amount of time in seconds the printer waits for additional data before canceling a print job. Notes: • "40 sec" is the factory default setting. • Wait Timeout is available only when the printer is using PostScript emulation. This setting has no effect on PCL emulation print jobs. Automatically restart the printer back into the normal operation. Note: "Reboot when idle" is the factory default setting. Determine the number of automatic restarts the printer can perform. Notes: • 5 is the factory default setting. • When the number of restarts equals the specified value, then the error message appears. Let the printer automatically continue printing from certain offline situations when not resolved within the specified time period. Note: Disabled is the factory default setting. Specify whether the printer reprints jammed pages. Notes: • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks. • On sets the printer to always reprint jammed pages. • Off sets the printer to never reprint jammed pages. - 89 -