Konica Minolta bizhub 3300P bizhub 3300P User Guide - Page 215
Step 6, Warning-Potential, Damage, Reinstall the imaging unit
View all Konica Minolta bizhub 3300P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
User's Guide Action Yes Step 6 Go to step 7. 1. Shake the imaging unit to redistribute the toner. a. Remove the toner cartridge, and then the imaging unit. b. Firmly shake the imaging unit. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. c. Reinstall the imaging unit, and then the cartridge. 2. Resend the print job. Is the print still too light? Step 7 Replace the imaging unit, and then resend the print job. Contact technical support. Is the print still too light? No The problem is solved. The problem is solved. - 215 -
User's Guide
- 215 -
Action
Yes
No
Step 6
1.
Shake the imaging unit to
redistribute the toner.
a.
Remove the toner cartridge,
and then the imaging unit.
b.
Firmly shake the imaging
unit.
Warning—Potential
Damage:
Do not expose
the imaging unit to direct
light for more than 10
minutes. Extended
exposure to light may cause
print quality problems.
c.
Reinstall the imaging unit,
and then the cartridge.
2.
Resend the print job.
Is the print still too light?
Go to step 7.
The problem is solved.
Step 7
Replace the imaging unit, and then
resend the print job.
Is the print still too light?
Contact
technical support
.
The problem is solved.