Konica Minolta bizhub 3300P bizhub 3300P User Guide - Page 203
Incorrect margins on prints
View all Konica Minolta bizhub 3300P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Incorrect margins on prints User's Guide Action Yes No Step 1 1. Move the width and length guides in the tray to the correct positions for the paper size loaded. 2. Resend the print job. The problem Go to step 2. is solved. Are the margins correct? Step 2 Go to step 3. Do one or more of the following: From the Paper menu, check if the paper size setting matches the paper loaded in the tray. To access the Paper menu, do either of the following: • Change the paper size setting to match the paper loaded in the tray. • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then, navigate to Settings >Paper Menu. • Change the paper loaded in the tray to match the paper size setting. Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. • If the printer is connected to a computer by a USB cable, then open the Local Printer Settings Utility for Windows or the Printer Settings for Macintosh. Does the paper size setting match the paper loaded in the tray? Step 3 1. Depending on your operating system, specify the paper size from Printing Preferences or from the Print dialog. The problem is solved. 2. Resend the print job. Contact technical support. Are the margins correct? - 203 -