Konica Minolta bizhub C550 bizhub C550 Network Scanner Operations User Guide - Page 180

Specifying Utility mode parameters 3 ! Detail To check a registered destination, select it, and then touch [Check Job Set.]. To change the settings for a registered destination, select it, and then touch [Edit]. The registration number cannot be changed in the Edit screen. To delete a registered destination, select it, and then touch [Delete]. 2 Note The registration cannot be completed if no settings are specified for "Name" and "E-Mail Address". To cancel the registration, touch [Cancel]. To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears. User Box Settings can be specified for the following for the user box destination to be registered. Parameter No. Name User Box Index Icon Description Type in the registration number (between 1 and 2000) for the address book destination. If nothing is entered when [OK] is touched, the destination is registered with the lowest available number. Type in a name of 24 characters or less for the registered destination. Select one user box where data is to be saved. Select the index characters. For frequently used destinations, touch [Favorites] so that the destination can be found more easily. Select an icon. C550 3-13