Konica Minolta bizhub C550 bizhub C550 Network Scanner Operations User Guide - Page 33
When first used, Network connection, Network settings
View all Konica Minolta bizhub C550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Before using scanning functions 1 1.3 When first used The network connections and settings must be specified before the network scanning functions can be used. Any other settings should be specified as necessary. Network connection Connect a UTP cable (category 5 or later recommended) from the network to the Ethernet connector on the machine. Network settings Assign an IP address to the machine and complete settings for the SMTP server, etc. For details, refer to "Network Settings" on page 4-2. Specifying the E-Mail address of the machine To send scanned data as an E-Mail message or to use the Internet fax function, register the E-Mail address on the machine beforehand. This E-Mail address is used when sending and receiving data. Generally, it is recommended that the E-Mail address registered for the administrator be used. If the E-Mail address registered for the administrator is not specified, the EMail address of the sender must be entered for each Scan to E-Mail operation. Scan to E-Mail operations are not possible without address entry. C550 1-10