Konica Minolta bizhub C550 bizhub C550 Network Scanner Operations User Guide - Page 371

Network Settings 4 4.21 Status Notification Setting Specify settings for sending notification of the machine's status by e-mail to the administrator. The status notification is sent if a notification destination e-mail address is entered and if any of the notification conditions have been set to "ON". The following notification addresses can be specified. - IP address - IPX address - E-mail address 2 Note Up to five IP addresses can be specified. If an IP address or IPX address is to be specified, use the TRAP function with SNMP. Set "TRAP Setting" on the SNMP Setting screen to "Allow". For details on "SNMP Settings", refer to "SNMP Settings" on page 4-96. Specifying an IP address Settings can be specified for the following. Parameter Address Port Number Community Name Notification Item Description Specify the notification host address. Specify the port number to be used for communication. To change the setting, press the [C] (clear) key, and then use the keypad to type in the desired port number. (Range: 1 to 65535) Type in the community name (15 characters or less). Specify the conditions when notification of the machine's status is sent. For details, refer to "Notification Item" on page 4-132. 1 Touch [5 Network Setting] in the Administrator Settings screen. - For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator Settings screen" on page 3-7. 2 Touch [Fwd.→] in the Network Settings screen, and then touch [5 De- tail Settings]. 3 Touch [3 Status Notification Setting]. The Status Notification Setting screen appears. C550 4-125