Konica Minolta bizhub C550 bizhub C550 Network Scanner Operations User Guide - Page 321
Network Settings, E-Mail TX SMTP screen 4/5, SMTP Detail screen displayed by touching [Detail Setting]
View all Konica Minolta bizhub C550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 321 highlights
Network Settings 4 E-Mail TX (SMTP) screen 4/5 Parameter Connection Timeout Server Capacity Description If transmission stops while an e-mail message is being sent to the SMTP server, the e-mail transmission operation is automatically aborted after a specified length of time has passed. Specify the length of time from the point when the transmission stops to the point when the transmission operation is to be aborted. To change the setting, touch [+] or [−] to specify the setting (in 30-second increments). (Range: 30 to 300 seconds) Specify the maximum capacity that the SMTP server can receive per e-mail message. To change the setting, press the [C] (clear) key, and then use the keypad to type in the desired setting. (Range: 1 to 100 Mbyte) To apply no limit, touch [No Limit]. E-Mail TX (SMTP) screen 5/5 Parameter SSL Setting Port No. Port Number (SSL) Description In order to apply SSL/TLS encryption to communications between this machine and the SMTP server, select "SMTP over SSL" or "Start TLS". Specify the port number if "Start TLS" was selected. To change the setting, touch [Input], press the [C] (clear) key, and then use the keypad to type in the desired port number. (Range: 1 to 65535) Specify the port number used with SSL communications if "SMTP over SSL" was selected. To change the setting, touch [Input], press the [C] (clear) key, and then use the keypad to type in the desired port number. (Range: 1 to 65535) SMTP Detail screen (displayed by touching [Detail Setting]) Parameter SMTP Authentication POP Before SMTP Authentication POP Before SMTP Time Description Select whether or not SMTP authentication is used. Touching [ON] displays a screen for entering SMTP authentication information. For details, refer to "SMTP Authentication" on page 4-81. Select whether or not POP Before SMTP authentication is used. Specify when POP Before SMTP authentication is used. To change the setting, press the [C] (clear) key, and then use the keypad to type in the desired setting. (Range: 0 to 60 seconds) ! Detail If the POP and SMTP servers are different, the POP server must notify the SMTP server when the POP server is logged on to. Therefore, if the time specified for "POP Before SMTP Time" is too short, it may not be possible to send e-mail. C550 4-75