Konica Minolta bizhub C550 bizhub C550 Network Scanner Operations User Guide - Page 263
TCP/IP Settings, If DHCP Settings is set to ON, [IP Address], [Subnet Mask] and [De
View all Konica Minolta bizhub C550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 263 highlights
Network Settings 4 4.3 TCP/IP Settings Settings can be specified in order to use this machine in a TCP/IP network environment. 2 Reminder In order apply all changes to the network settings, this machine must be turned off, then on again. When the machine is turned off, then on again with the main power switch, wait at least 10 seconds to turn on the machine after turning it off; otherwise, the machine may not function correctly. ! Detail If "DHCP Settings" is set to "ON", [IP Address], [Subnet Mask] and [Default Gateway] are not available. When a DHCP server is used, the IP address, subnet mask and default gateway are automatically assigned by the DHCP server; therefore, it is not necessary to assign them manually. However, note the following points. Check with the network administrator that the DHCP server is available. If a DHCP server is not available, be sure to specify settings for "IP Address", "Subnet Mask" and "Default Gateway". If the IP address and other settings have been assigned by the DHCP server, they may automatically be changed. If this happens, it may no longer be possible to specify this machine on the network by its IP address. If "DHCP Settings" is set to "ON", it is recommended that the IP address assigned to the machine be fixed by configuring the DHCP server. For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator Settings screen" on page 3-7. 2 Note To exit Utility mode, press the [Utility/Counter] key or the [Reset] key. C550 4-17