Konica Minolta bizhub PRESS 1052 User Guide - Page 111

10.3 Parameter details 10 10.3.3 [Layout] tab Function Name [Combination] [Combination Details] [Imposition] [Rotate 180] [Skip Blank Pages] [Chapters] [Print Position Settings] [Print Type] [Adhesive binding] [Binding Position] [Binding Margin] [Binding Margin Settings...] Option [2-in-1], [4-in-1], [6-in-1], [9-in-1], [16-in-1] [2 x 2], [3 x 3], [4 x 4] - [2 Repeat], [2 Repeat Reversal (U)], [2 Repeat Reversal (D)], [2 Repeat Reversal (L)], [2 Repeat Reversal (R)], [2 in 1] Off, On Off, On Off, On [Top], [Center], [Bottom] [1-Sided], [2-Sided] , [Booklet], [Booklet (Original Size x 2)] Off, On [Auto], [Left Bind], [Right Bind], [Top Bind] Off, On - Description Prints multiple pages onto a single sheet by reducing the size of the document. Or prints one page onto multiple sheets by enlarging the size of the document. Select the condition of combination. For details, refer to page 10-17. Set this to perform an imposition printing. Outputs onto paper in twice the size specified in the [Original Size]. For example : When the [Paper Size] is A4, the document is printed with A3 sheet. Select this check box to rotate the document 180 to print. Set this not to print blank pages. Set this to print page on the front side of paper. It can be specified when Print Type is [2-Sided]. Specify the print position. It can be specified when the page size is the wide size such as [A4W] and the custom paper size. Select a print type. Set this to use the [Adhesive binding] function. You can print the original with the page order that is arranged so that folding each sheet in half and collecting them creates a booklet. It can be specified when the[2-Sided] is specified in the [Print Type]. Specify the binding position. Set this to use the binding margin. You can specify the width of the binding margin in the [Binding Margin Settings...]. You can specify detail settings of the binding margin. For details, refer to page 10-18. bizhub PRESS 1250/1250P/1052 10-15