Konica Minolta bizhub PRESS 1052 User Guide - Page 51
If the Windows logo testing or [Digital Signature] window appears, click [Continue Anyway] or
View all Konica Minolta bizhub PRESS 1052 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
5.2 Windows XP/Server 2003 5 10 Select [Custom], and then click [Settings:]. 11 Change the settings according to the port, and then click [OK]. % For LPR connection, select [LPR], and then enter "Print" in the [Queue Name:] box. % You must discriminate between upper and lower case letters when entering it. % For Port9100, select [Raw], and then enter a RAW port number (initial setting: [9100]) in the [Port Number:] box. 12 Click [Next >]. 13 Click [Finish]. 14 Click [Have Disk...]. 15 Click [Browse...]. 16 Select a desired printer driver folder in the CD-ROM, and then click [Open]. % Select a folder according to the printer driver, operating system, and language to be used. Available printer drivers: PCL driver, PS Plug-in driver, PPD driver 17 Click [OK]. The [Printers] list appears. 18 Click [Next >]. 19 Follow the instructions on the pages that follow. % To use a network connection, perform a test print after the network settings have been configured. 20 Click [Finish]. % If the "Windows logo testing" or [Digital Signature] window appears, click [Continue Anyway] or [Yes]. 21 After finishing the installation, make sure that the icon for the installed printer is displayed in the [Printers and Faxes] window. 22 Remove the CD-ROM from the CD-ROM drive. This completes the printer driver installation. bizhub PRESS 1250/1250P/1052 5-17