Konica Minolta bizhub PRESS 1052 User Guide - Page 115
Image Shift Settings
View all Konica Minolta bizhub PRESS 1052 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
10.3 Parameter details 10 Image Shift Settings Function Name Switch Setting Option [Use Driver Settings] [Use Printer Settings] Unit Front Side/Back Side [mm], [inch] - Left/Right Top/Bottom Page Interval 0 - 250 mm 0 - 250 mm -250 mm to 250 mm Outside Offset 0 to 50 mm Description [Use Driver Settings] : Set this to use the shift width set by this printer driver. [Use Printer Settings] : Uses the values specified on the control panel on this machine. Select the measurement units for the size settings. Specify the shift direction and the shift width. When you remove the check from the [Same value for front and back ] on 2-Sided printing, you can specify the width to the front and the back respectively. Shifts the position of the printing image with the specified amount to the left/right. Shifts the position of the printing image with the specified amount to the top/bottom. You can specify the spacing to use between pages when the Booklet or Imposition (other than 2 in 1) is specified. When you specify the negative value (-), pages will be overlapped with the specified width. When the [Booklet] is specified, you can adjust the page interval so that the narrower margin is created for the more outer page, considering the thickness on folding paper. bizhub PRESS 1250/1250P/1052 10-19