Konica Minolta bizhub PRESS 1052 User Guide - Page 40
If [Additional Port Information Required] or [More Port Information Required] dialog box appears, go
View all Konica Minolta bizhub PRESS 1052 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
5.1 Windows Vista/Server 2008/Server 2008 R2/7 5 % To use the LPR/Port9100 protocol, select [Standard TCP/IP Port]. % To use the SMB connection, select [Local Port]. 6 Click [Next]. 7 Specify the IP address and port. % To use the LPR/Port9100 protocol, select [TCP/IP Device], and then enter the IP address. % To use the SMB connection, enter [\\NetBIOS name\print service name] in the "Port Name" box. % Enter the same NetBIOS name and print service name specified in [SMB Setting] - [Print Setting]. 8 Click [Next]. % If [Additional Port Information Required] or [More Port Information Required] dialog box appears, go to Step 10. % If the [Install the printer driver] dialog box appears, go to Step 13. 9 Select [Custom], and then click [Settings...]. 10 Change the settings according to the port, and then click [OK]. % For LPR connection, select [LPR], and then enter "Print" in the [Queue Name:] box. % You must discriminate between upper and lower case letters when entering it. % For Port9100, select [Raw], and then enter a RAW port number (initial setting: [9100]) in the [Port Number:] box. % If both LPR and Port 9100 are enabled on this machine, the printer driver is connected to this ma- chine using LPR. 11 Click [Next]. The [Install the printer driver] page appears. 12 Click [Have Disk...]. 13 Click [Browse...]. 14 Select a desired printer driver folder in the CD-ROM, and then click [Open]. % Select a folder according to the printer driver, operating system, and language to be used. Available printer drivers: PS Plug-in driver, PPD driver, PCL driver 15 Click [OK]. bizhub PRESS 1250/1250P/1052 5-6