Konica Minolta bizhub PRESS 1250 bizhub PRESS 1250/1250P/1052/PRO 951 User Gui - Page 28

sheet of the adjustment chart to confirm the result. If readjustment is needed, repeat steps 5 to 10.

Get Konica Minolta bizhub PRESS 1250 PDF manuals and user guides View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

2 The Workflow of Both Sides Adjust 2.2 Fourth time: Set the back side of the adjustment chart face up (turned away from the original glass), with its bottom edge positioned to the back side. % When four times of scanning are completed, a dialog is displayed to calculate the adjustment value. 10 Select whether to continue the scan measurement or to finish the scan measurement and calculate the adjustment value. To continue the scan measurement, press [No]. To finish the scan measurement and calculate the adjustment value, press [Yes]. % Pressing [No] returns to the Scan Adjustment Chart Screen on which the counter of [Chart Sheets] is added by one. Repeat steps 7 to 9 for the number of adjustment charts. The measurement results will be added up. This operation can be repeated up to 20 times. When the 20th scan measurement is completed, [No] can no longer be pressed. % Pressing [Yes] automatically calculates the adjustment value from the added measurement results and reflects it on Zoom and Image Shift to be specified for [Back]. After pressing [Yes], output a sheet of the adjustment chart to confirm the result. If readjustment is needed, repeat steps 5 to 10. % If the adjustment value calculated by pressing [Yes] exceeds the adjustment range, the following dialog is displayed. Press [Close] to discard the measurement results, and restart the scan measurement from the beginning. Possible causes to exceed the adjustment range may include that the chart used in the scan measurement is incorrect (a different chart has been used), the printing position of the front side has been poorly adjusted, or the adjustments of the reference positions are not completed. Confirm these points before restarting the scan measurement. 2-10 bizhub PRESS 1250/1250P/1052, bizhub PRO 951

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
2-10
bizhub PRESS 1250/1250P/1052, bizhub PRO 951
The Workflow of Both Sides Adjust
2
2.2
Fourth time: Set the back side of the adjustment chart face up (turned away from the original glass),
with its bottom edge positioned to the back side.
%
When four times of scanning are completed, a dialog is displayed to calculate the adjustment value.
10
Select whether to continue the scan measurement or to finish the scan measurement and calculate the
adjustment value.
To continue the scan measurement, press [No].
To finish the scan measurement and calculate the adjustment value, press [Yes].
%
Pressing [No] returns to the Scan Adjustment Chart Screen on which the counter of [Chart Sheets]
is added by one. Repeat steps 7 to 9 for the number of adjustment charts. The measurement results
will be added up. This operation can be repeated up to 20 times. When the 20th scan measurement
is completed, [No] can no longer be pressed.
%
Pressing [Yes] automatically calculates the adjustment value from the added measurement results
and reflects it on Zoom and Image Shift to be specified for [Back]. After pressing [Yes], output a
sheet of the adjustment chart to confirm the result. If readjustment is needed, repeat steps 5 to 10.
%
If the adjustment value calculated by pressing [Yes] exceeds the adjustment range, the following
dialog is displayed. Press [Close] to discard the measurement results, and restart the scan meas-
urement from the beginning. Possible causes to exceed the adjustment range may include that the
chart used in the scan measurement is incorrect (a different chart has been used), the printing po-
sition of the front side has been poorly adjusted, or the adjustments of the reference positions are
not completed. Confirm these points before restarting the scan measurement.